Callsign

Cash Donations (Exclusive of Station Support Assessments)

Equipment Provided to PJ2T

Labor Donated to PJ2T

• $38.00 duty on dishes, WTS transformer, guy wire

• 350 feet RG-8X coax with connectors

• 30 rolls electrical tape

• Large bag tiewraps

• 2 56K PCI internal MODEMS

• 6 universal ISA universal interface cards

• 1 PCI Ethernet adapter card

• Set of hand tools, in carrying case

• CD player

• RigBlaster Pro

• 6 RigRunners 

• 60% donation of 14 inch flat screen monitor

• Heat shrink gun and assortment of tubing

• Many electronic components

• Much assorted West Mountain Radio equipment

120.00 storage fees

500.00 unrestricted donation

200.00 unrestricted donation

300.00 unrestricted donations

42.00 duty on 17 inch computer monitor

325.00 in response to Nov 2001 assessment

20.00 cash for FT-1000 shipping

• Multiple fans for station

• Paint and hardware for towers

• Electric fence poles and insulators for Beverage

• Amidon TVI reduction kit

• Folding table for additional station on porch

• Tablecloth and place mats 

• 100 feet flexible conduit

• New band switch assembly for Titan II ($99.80)

• Five weeks of sweat labor on three separate trips to renovate house and build towers and prepare for contests.

• Ceaseless work on the station during contest operations.

• Repair of five linear amps prior to CQWW CW 2002

• Repair of floor fan

• Repair of security system keylock

April 2005: Large (amount not disclosed at Mal's request) unrestricted cash donation

June 2006: Another very large unrestricted cash donation

Third large cash donation toward the outside maintenance fund

June 2008: Large cash donation, unrestricted, in connection with membership renewal. 

• Three tables for the stations

• Coax jumper cables for CQWW CW 2002 M/M operation

• MFJ-259

• Uni-T UT60 Digital Multimeter

340.00 Phillystran and shipping costs

285.00 Ham IV rotor, used

320.00 four new Rohn TB-2 thrust bearings

40.00 fuel donation for Ryder rental

325.00 in response to Nov 2001 assessment

151.00 for FT-1000 shipping

100.00 donation with membership renewal, June 2005

300.00 donation in connection with ARRL DX CW 2008

• All coax connectors for indoor switching

• Most of the egg insulators for guy wires

• Alpha 78 linear, owned by W8TK and provided to PJ2T from the W8AV station

• Two new Cablewave Heliax connectors - 7/8 inch, for six meters

• Ham IV rotor

• 8 sections of Windcharger tower

• Five element 10 meter yagi, subsequently rehabilitated by N8LGP

• Tool box

• Tower obstruction light assembly

• Picked up cost of 300 ft of 6700 pound Phillystran for tower guys

• 100+ ft of 213, with connectors

• 150 ft of 9913

• Three 8-pin Kenwood DIN plugs

• 10 SO-239 to phono plug adapters for RX antenna switch boxes

• Piexx computer interface board for Zilko TS-940

• Purchased and paid for new AL-1200 filament transformer and panel lights for meters - $80.00

• 180 feet poly twinlead for 80 Eur beam

• Hy-Gain boom-to-mast clamp

• Two Klein pork chop wire grips

• Watters rotary coax switch

• 2 rack panels (new)

• Many hours of work putting PL-259s on all jumpers for the indoor switching system

200.00 unrestricted donation

50.00 Lowe's cash card for hardware

325.00 in response to Nov 2001 assessment

200.00 donation (May 2005) for transceiver maintenance (IC-765)

• Toshiba laptop computer, mouse, and Sony CD drive

• Ham IV rotor and control box

• QRZ Industries voice keyer

• Numerous computer boards

• 95 feet 7/8 inch hardline for six meters

• Gin pole by WB0W 50% share

• 450 ft RG-213 coax for interior switching system

• Icom IC-2A HT

• Timewave DSP-9

• Linksys five-port Ethernet hub for backup

• An ISA COM port board

• Several Hardline connectors for 1/2 inch Heliax

• Electrical tape, Phillystran deadends and misc pieces of Phillystran

• Miscellaneous tower goodies such as turnbuckles

• Two Drake low pass filters

• Top Ten Six-Way outdoor coax switch

• CDR-W drive, LPT1 switch box, two Heil boomsets

• 450 feet RG-213, new

• Ramsey Electronics 20 meter XCVR and amp kits

• Hamfest items: Dell Optiplex GX Pro desktop PC, Toshiba 205CDS laptop PC, WinTV Model 190 video capture card (new in box), Addionics WebShuttle internet sharing device (new in box), Video Director video editing tool, Kenwood TS9130 2 meter all mode transceiver, Linksys 5 port Ethernet hub, USR 56K Sportster FAX MODEM, TV card and driver software for PC, Quickpix Qp2 Nisis camera and software, Assorted red and green LEDs, Pinnacle Systems PCTV Deluxe Video Capture adapter and software, Lots and lots of super books, paper and hardback, for the QTH.

• IC-765 transceiver

• Two weeks of sweat labor,  building the towers and erecting yagis

25.00 for FT-1000 shipping

• Two coax switches

• Four Citel surge protectors

• Samlex SEC-1212 12 volt 10 amp DC power supply for Omni-VI + Ten-Tec cable

• APC Surge Arrest Professional

• Bencher paddle

• Clark Electronics (K1FZ) KB-4 Splitters (5)

• KD9SV antenna switches/preamps (2)

• W3NQN 160 bandpass filter

• INRAD Filters for Omni VI (400, 250)

• Ten-Tec 250 Hz filter, 6.3 MHz IF (#221)

• West Mountain RIGRunner 4005 and connectors

• K9AY 4-direction switching

• K9AY mechanicals

• 375 feet rotor cable to control K9AY switch

• "DXing on the Edge"

• K1FZ Beverage transformer

• Amidon UNUM transformer box for 160 Inv-L

• Comtek Radial Ring

• "Reducing Interstation Interference," W2VJN

• 500 ft #12 stranded insulated blue wire

• 1500 ft UV-resistant antenna rope

• Many Amphenol coax connectors and adapters

• New ham radio books for PJ2T Bookshelf, including ON4UN "Low Band DXing" and many others

• WX0B IBS-1 Band Decoder and cables, for future auto switching at Station # 3

• Pennant Antennas: 12 fiberglass mast sections, 4 guy rings, 200 feet of pennant wire, K1FZ KB-4 Hybrid Splitter, 2 pennant matching transformers (18:1), 4 FT240-F toroids, Elbert County 160/80 remote preamp, termination resistor pots, 300 feet RG-8X

• WX0B Inv-L static suppression inductor

• Many batteries for the radio closet

• 4 decks playing cards

• Two CW filters for FT-1000 sub receiver

• Curacao flags

• ARRL flag

• 50% ($850) of cost of DX Engineering RX array

• Three Radio Shack foot switches

369.20 Rohn 45 top section and 500 feet rotor cable

325.00 in response to Nov 2001 assessment

400.00 unrestricted donation

200.00 unrestricted donation

100.00 unrestricted donation

475.00 unrestricted donation

575.00 unrestricted donation May 2008

• 6 sections of Rohn 45 tower, including guy brackets, equalizer plates and hardware

• 1150 ft 1/4 inch EHS guy wire

• Climbing belt

• Many pairs of work gloves

• Numerous tower-building aids, such as Anti-Sieze, small hand tools, carabiners, antenna straps (nylon), rope clips

• Snatch block pulley, block and tackle pulley

• Gin pole by WB0W -- 50% share

• Rohn 45 tower base and top plate

• Comealong winch

• 300 feet rotor cable, used for DC control lines

• New Hy-Gain rotor motor, Cush Craft loading rod bracket kit, insulating rod for 40 meter driven element, shipping on above via FedEx to island

• 36 1/4 inch EHS deadends

• 2000 ft of #16 stranded, teflon-coated radial wire

• Hy-Gain rotor control box with Rotor-EZ modification installed

• Complete set of replacement components for StackMatch control box

• Hy-Gain D-shell clamp and boom to mast clamp

• Two weeks of sweat labor, mostly 100 feet in the air, building the towers and erecting yagis

• Labor installing Rotor-EZ modification and RS-232 interface in three T2X rotor control boxes

36.00 filter donation

500.00 unrestricted donation

200.00 unrestricted donation

325.00 in response to Nov 2001 assessment

75.00 50% of Dayton meeting room 2003

$455 purchase of two new 8874s for Alpha linears

$712 cost of factory rebuild of Alpha 78 linear

• TS-940

• Yaesu 2 meter FM transceiver

• Six keyers and four Bencher keying paddles

• Ten-Tec Centaur linear

• TS-440 transceiver

• Epson computer printer

• Alpha 78 linear

• IC-765 transceiver

• Climbing belt

• Electric circular saw

• Five LPT keying adapters

• Heil foot switch

• Complete set W3NQN bandpass filters

• Many assorted hand tools

• Custom nametags for the entire membership

• Pair of Alinco DJ-190 2 meter FM HTs and battery charger

• Handheld frequency counter

• Three new Cetron 811As for Centaur (spare tubes)

• AM signal sniffer and antenna

• Atomic clock for PJ2T

• Line voltage monitor

• Mini-keyboard

• Seven Telex headsets

• MFJ SWR and wattmeter

• TS-930 transceiver

• Omni VI Transceiver and outboard VFO control

• Daiwa CN-720 SWR meter

• Rigblaster

• Ham-IV rotor

• Two additional TS-930s and Piexx interface boards for them

• "The 2002 Radio Amateur's Handbook" and "The ARRL RFI Book", new August 2002.

• Envision EN-710 17 inch monitor, new

• 8333 IF 400 Hz IRC crystal filter for TS-930

• SX-99 SWL receiver

• Drake SSR-1 SWL receiver

• SIX Yaesu FT-1000MP  transceivers

• Two Curtis keyers

• Logikeyer (number two)

• 8874 tube ($166)

• Collins 30L-1 Linear

• W5XD Writelog MultiKeyer

• 25 amp MFJ Switching Power Supply

• Astron RS-35 DC power supply

• Many coax tees and adapters for rejection stubs

• Two new sets of Stanley screwdrivers

• INRAD mod kits for FT-1000s ($91.00)

• Approximately $700 (market value) of basement items for flea market sales

• Palstar DL2K Dummy Load (new, ~$180)

• Two Bencher paddles

• Two custom Cabbage Cases for FT-1000 shipping

• Four K1EL WinKeyers, purchased, assembled, and tested by W8TK

• 4CX1600B tube for Titan II, new

• Astron RS-35M (Jan 2006)

• Climbing harness and gorilla hook, new (Jan 2006)

• Ten-Tec Titan III Model 417 linear amplifier

• Tower Climbing and Safety textbook

• Assorted hand tools and workbench magnifying aids

• Two hand made 160 meter UNUM transformers Photo
•  

•  Two HPS power transformers for better AC regulation ($808 value), from WTS and Zero Layer Power Systems

200.00 unrestricted donation

325.00 in response to Nov 2001 assessment

• First aid kit

120.00 - half of 20 meter stack box

120.00 storage fees

500.00 unrestricted donation

200.00 supplemental storage fees donation

3333.00 unrestricted donation

52.00 import duty on AL-1200

50.00 for N7BG Heliax

325.00 in response to Nov 2001 assessment

30.00 for FT-1000 shipping

• 250 feet rotor cable

• Four weeks of sweat equity on initial station construction and tower and antenna building

50.00 for FT-1000 shipping

• IC-505 six meter all mode transceiver

• Many assorted coax N connectors

• Simpson VOM

• Assorted antenna insulators

• Pair of Alinco DJ-S11 handhelds

• Amphenol right angle connectors

• Radio Shack 25 amp switching power supply

• Many antenna insulators

• Simpson 260 VOM

• Yaesu and Ten-Tec Heil Proset adapters

• IC-228A FM transceiver for PacketCluster

• First aid equipment and assorted medication

• Chaise recliner chair

• 50% ($850) of cost of DX Engineering RX array

200.00 unrestricted donation

325.00 in response to Nov 2001 assessment

ARRL CW 2006 plaque sponsored, World 21 MHz CW

240.00 donation in connection with ARRL DX CW 2008

• TS-930 transceiver

• Used 3CX800A7

• Alpha 76 linear

• Foot switch

• Heil mic/cable adapter (Yaesu)

• Bag of PL-259, tie wraps, batteries

• FT-100 transceiver

• Canon BJC-2100 printer

• Various rigging supplies and cable chemicals

• Complete set of CL-33 traps

• StackMatch Spare Board

• 3 7/8 inch hardline connectors

• Countless hours of tower painting work spread over a three year period
• 50% of cost of new bed in East bedroom

92.00 duty on WARC yagi

110.00 unrestricted donation

500.00 unrestricted donation

100.00 unrestricted donation

94.70 MODEM for computer at Station # 2

100.00 excess baggage charges to take computers to CUR

1985.00 Rohn components for shipment

97.43 duty on computers

96.64 parts for W9VA TS-930

107.67 rebuild of rotor

50.00 excess baggage charge for hauling wiring duct to CUR

200.00 unrestricted donation

984.74 Ryder truck rental to MIA

208.35 airfare from FLL to CLE for W0CG

222.18 fuel for rental truck

2207.05 ocean freight

477.19 port tax on shipment

992.05 import duty for shipment

680.00 surcharges on shipment

140.00 local delivery on CUR for shipment

102.08 Three APC Professional surge arrest strips

46.60 shipping of QSLs to members

38.38 stainless steel hardware for truss project

239.60 Eight Daiwa coax switches and all aluminum panel stock and hardware

80.65 two component paint for towers

125.00 excess baggage charges for antenna truss kits

41.79 ferrites and fuses

139.79 CATS rebuild of antenna rotor

79.72 duty on Pentium computers

240.00 Top Ten band decoder and antenna switch box

74.29 plywood for shipment and concrete forms

1760.00 for excavation, concrete, labor on tower bases

35.00 overweight charge an Alpha 78 baggage

32.00 import duty on Alpha 78

50.00 for N7BG Heliax

325.00 in response to Nov 2001 assessment

32.95 for another Daiwa CS-201 coax switch to switch 75 vee at Station # 1

139.24 Hosfelt Electronics for fuses, receive antenna boxes and components, ferrites, tie wraps, muffin fans, computer cables, relays for W3NQN panel

56.25 new filament transformer for AL-1200

139.24 fans and parts for RX boxes, ferrites

23.90 parts for TS-940 repair

44.23 Daiwa coax switch for 75 vee

33.00 shipping of EN-710 monitor to WC4E

95.00 for Piexx TS-940 serial interface (K3TUP radio)

14.00 shipping of computer to W0NB

39.00 shipping of computer to K1AR

60.00 DVD blanks for N8BJQ project

15.00 shipping of TNC to W2CQ

75.00 50% of Dayton meeting room 2003

50.00 for FT-1000 shipping

175.00 for Titan III shipping and duty, October 2006

• TS-940 for Station # 3

• TS-940 for Station # 1 and backup

• Rebuild costs by CATS of three rotors

• 205-BAS yagi

• 205-BAS yagi

• 205-BAS yagi

• XM-510G yagi

• XM-510G yagi

• Six meter yagi, new, Cush Craft

• A-3S triband yagi

• A-3WS WARC triband yagi

• 40-2CD 40 meter yagi

• Ringo Ranger ARX-2B vertical

• All tubing and hardware to install W6QHS reinforcements in 40-2CD

• K8DX five element 15 yagi on 48 foot boom and misc 3 inch boom sections and hardware

• 6 sections Rohn 55G tower

• Hardware for tower bases

• Two 486 laptop computers

• Three B & W coax switches

• Top-Ten Devices Band Decoder

• Aluminum panel stock and all hardware for coax entry panels

• CT network cabling system components, assembled by K8RF

• RCS-8V antenna switch

• 486 DMI minitower computer with 14 inch monitor

• IBM Pentium desktop system

• IBM Pentium desktop system

• 17 inch IBM monitors (two)

• Complete set 25G guy cable, guy brackets, and equalizer plates

• 2500 ft insulated #14 Cu for radials and antennas

• Two new come-along hand winches

• 600 ft yellow poly rope, 1/2 inch, new

• Hubbel wiring duct (35 linear feet), all fittings and fixtures, and all wiring

• 2000 VA stepdown transformer

• 800 VA stepdown transformer

• 16 new Amphenol Type N female connectors

• Two coax switches

• Four yellow rope reels and rope, 250 ft each

• Six sections Rohn 25G tower

• 160 meter inv vee

• 8333 IF CW filter for Zilko TS-940

• Labor to build W3NQN filter panel for Station # 1

• 16 weeks sweat labor for station building

• Labor to build all coax pigtails for all antennas prior to shipment

• Fabrication and installation of antenna boom truss kits

• Installation of coax switching system

• Installation of CT serial network

• Six HP wheel mice
• Other items to be updated

• 2 hardline connectors for RG-218/U
• 2 rack panels, black crinkle

1000.00 unrestricted donation, 2004

• 154-BAS yagi

• 160 meter UNUM box and RX antenna switching box

• Complete service manuals for TS-940 and TS-930

• Foot switch

• Set of Heil muffs for BM-10

• IC-706 MKII HF/VHF transceiver

• Two Daiwa coax switches

• Multiple coax connectors

• 100 feet of direct burial RG-213 for the 80 meter loop array

• Two coax switches

• AC powerline filters for computers

• Multiple barrel and quick disconnect connectors

• T2X rotor

• Remote coax switch

• New set of cookware for the QTH

• Single 3-400Z home brew linear amp and power supply

• Ham-III rotor

36.00 filters donation

300.00 unrestricted donation

325.00 in response to Nov 2001 assessment

261.00 unrestricted donation February 2007

• Countless boxes of hardware and toolkits for tower and antenna construction

• Many assorted hand tools

• TA-34 XL yagi

• Four sections Rohn 25G tower

• Custom aluminum bracket for obstruction light mount

• 8 custom-built foot-switches, June 2006

• Five 2 inch Hy-Gain boom sections for 2006 antenna repair project.

• Hundreds of hours of labor to completely rebuild both 20 yagis, the 15 Europe yagi, the 10 meter Europe yagi, and the 40 meter W6QHS yagi reinforcements, including packing.

• Many hours of labor in August of 2006 to fabricate parts for PJ2T antenna repairs.

• 80 meter vertical

• Labor to construct CT network cables plus all ferrites and connectors

• Repair/rebuild of two TS-930s

• CAD-CAM production of tower drawings for building permits

36.00 filter donation

20.00 storage fees

40.00 unrestricted donation

100.00 unrestricted donation

200.00 unrestricted donation

325.00 in response to Nov 2001 assessment

• Complete comprehensive kit of plugs, adapters, connectors for DC and signal wiring

• Telephone

• Many assorted hand tools

• Hampton track lighting kit

• D-Link DI-604 gateway

• CD ROM drive

• NIC card

• Miscellaneous Ethernet cables and connectors

• Heath HM-15 SWR meter 

• One week of sweat labor to initially work on house renovation and raise the PJ9JT tower and repair the roof.

• Barrel connectors for CT BNC network

• Ham IV rotor

• Mast pipes for both towers

• Watters rotary coax switch, can type

• ISA MODEM, 500 feet RG-8X class coax, four quick disconnect PL-259s, desk lamp for Station # 3

• 100 feet RG-8/U category coax

• VOM and many assorted tools and shack goodies

• RCS-8V

• Complete set of W2VJN custom-tuned band rejection stubs

• 6 meter loop antenna

• Hard drive for DMI 486 mini tower computer

• Heil boomset

• Electronics for vertical receiving array

• Design and construction of 75 meter 3 el delta loop beam

• Set of interface cables for Top Ten DX Doubler

75.00 share (after rebate) of 17 inch monitor

75.00 license for Writelog

~80.00 duty on Pentium systems

30.00 for Year 2 Writelog license

~120.00 UPS shipping costs for three Pentium PCs

~ 80.00 UPS shipping costs for two Pentium PCs

Shipping costs for three Pentium desktop PCs

Shipping for four Compaq power supplies, May 2007

• Two complete Pentium computer systems

• New 17 inch monitor

• Radial wire and 500 feet UV-resistant antenna rope

• Floor fan

• Homebrew rig control / keying serial interface for IC-765 (Sept 2001)

• AEA PK-232/MBX RTTY/Packet terminal unit, wired for IC-765 (Jan 2002)

• Envision 17 inch monitor, new, plus shipping to WA9S

• Three hard drives, 2 SoundBlasters, 1 PCI VGA, 1 NIC, 1 3.5 inch floppy drive, 1 CR-R drive, 1 ISA MODEM card, December, 2002

• Instinet SuperStack II Switch 1000 (12 ports) (NW0L)
  SN 7WLR055281

• Instinet SuperStack II Hub 10 (NW0L)
  SN 0301/7TAR245593

• CD R/W for Station # 2 computer

• Two Sony CD R/RW burners

• Netgear  WGR614 Wireless Router

• Four Canon BCI-21 black ink cartridges

325.00 in response to Nov 2001 assessment

• TS-930, currently at K8RF for repairs

• 204-BA yagi

• Daiwa SWR/power meter

• Ham IV rotor